Modules

logiR-ADIO – Analog, Digital I/O and Microphone Input Module - LR 3.5, LR 3.2/3.0
logiR-ADIO – Analog, Digital I/O and Microphone Input Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • multipurpose board
  • supports 3 digital I/Os, 1 differential or unipolar analog input, and 1 microphone input
  • ADC input – measure different analog values from the test-vehicle
  • DIGITAL IO – sense or activated I/Os at the automotive and other voltage levels
  • MIC INPUT – for audio notification of logged events
logiR-FLEX2 – 2 Dual-Channel FlexRay Module - LR 3.5, LR 3.2/3.0
logiR-FLEX2 – 2 Dual-Channel FlexRay Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • 2 Freescale NXP controllers MFR4310
  • FlexRay channels driven via the NXP TJA1080A PHY
  • signals terminated by 100 Ohm termination resistors
logiR-UART – 2-Channel UART Module - LR 3.5, LR 3.2/3.0
logiR-UART – 2-Channel UART Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • integrated two RS232 channels, up to 460kb/s, with ADM3202ARN PHY from Analog Devices
  • supports TX and RX signals only
logiR-LIN – 2-Channel LIN Module - LR 3.5, LR 3.2/3.0
logiR-LIN – 2-Channel LIN Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • integrated 20kb/s TPIC1021DRG4 PHY from Texas Instruments
logiR-CANSW – 2-Channel CAN SW Module - LR 3.5, LR 3.2/3.0
logiR-CANSW – 2-Channel CAN SW Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • integrated CAN2.0B single wire 33kb/s or 83kb/s NCV7356 PHY from On Semiconductors
  • CAN line terminated by 5K6 Ohm termination resistors
logiR-CANLS – 2-Channel CAN LS Module - LR 3.5, LR 3.2/3.0
logiR-CANLS – 2-Channel CAN LS Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • integrated CAN2.0B low speed 125kb/s TJA1055T PHY from NXP Semiconductors
  • CAN lines terminated by 5K6 Ohm termination resistors
logiR-CANFD – 2-Channel CAN FD Module - LR 3.5, LR 3.2/3.0
logiR-CANFD – 2-Channel CAN FD Module - LR 3.5, LR 3.2/3.0
  • compatible with logiRECORDER 3.5 and logiRECORDER 3.2/3.0
  • integrated CAN 2.0C 5.0 Mb/s TJA 1049T PHY from NXP Semiconductors
  • CAN High Speed support
  • programmable 120 Ohm termination software controlled through the logiRECORDER Dashboard

Ordering information

Product name Product number Description
logiR-ADIO 61-03001-18-00001 Analog and Digital IO module
logiR-FLEX2 61-06001-18-00001 FlexRay two dual-channel (A & B) interfaces module
logiR-UART 61-01001-18-00001 UART two-channel module
logiR-LIN 61-01002-18-00001 LIN two-channel module
logiR-CANSW 61-01006-18-00001 CAN SW module
logiR-CANLS 61-01004-18-00001 CAN LS two-channel module
logiR-CANFD 61-01003-18-00001 CAN FD/HS two-channel module

Documents

XYLON QUATTRO Brochure (EN)

logiRECORDER 3.5 Brochure (EN)

logiRECORDER 3.2 Brochure (EN)

logiRECORDER 3.2 Brochure (CN)

logiRECORDER 3.2 Brochure (JP)

logiRECORDER 3.2 Brochure (KOR)

Related links

logiRECORDER System Connections

Vehicle Interfacing